一般

青少年發明家比賽 的意義

雖然 青少年發明家比賽2010 兩個回合的比賽已順利完成,但這比賽的精神,仍持久悠長。青少年發明家比賽 (Young Inventor Competition)2010 的意義,在於鼓勵本港青少年將科技融入生活。科技,很多時候是由工程師帶都我們的生活的。

工程師盡是悶人?
曾有一段時間,很怕向人透露自己做工程行業,尤其是對非工程或非科技界的朋友。我介紹自己是做工程行業的,會換來「噢~」,之後便是一段 dead air 的尷尬場面,又或是幾分鐘 dead air 後,他會禮貌的說「有些工作總是需要人去做的,很高興認識你。」然後逃之夭夭。心想似乎「工程師」這行,全都是「悶棍」?

其實呢,我們也是普通人。我們不是別人想的全都是 geek。也許很多時某些工程師都有比較薄弱的社交能力,因為他們醉心科技嘛。又他們喜好的小機器,小玩意兒別人又不太懂,所以和別人的話題也沒有太共通喇。當然啦,有時間太醉心自己喜愛的科技玩意不覺會忘形的不斷說起,別人不明白一堆問號自然不知所措啦。所以我們工程界的人士也要多顧別人的感受呢。

工程界走向社會
今次香港三大機械工程師學會聯手打造這青少年發明家比賽,就是一個給大家近距離接觸我們機械工程朋友的機會。

其實機械工程師的工作範圍很闊,有些機械工程師專於熱傳、水力、機電學,又或是發電、鐵路、空氣調節及冷凝系統、升降機與電梯等。有些負責研究,有的負責設計,有的做模擬運作和驗試,也有做機器安裝的,當然也有策劃及管理,甚至是操作及保養。

大家多了解我們這一族群,就會知道工程界的生活,也可以多采多姿的。

總決賽比賽規則

青少年發明家比賽2008-2009
總決賽比賽規則

比賽內容:
所有學生不限材料,設計及製造一個廢物收集器,在指定的時間內在沙灘上收集不同類型的廢物。並以所收集廢物的數量、收集器的結構及製作成本作評級。

限制事項:
收集器尺寸不可大於450mm x 900 mm;
收集器不得高於 450mm;
收集器的重於10kg;
收集器可載有無線電裝置;

比賽場地:
比賽範圍是一個約5m(闊) x 5m(長) 的沙地,地面凹凸不平;
比賽範圍旁邊設有一個1m x 1m的收集區;
沙灘上放置不同種類的廢物,如膠樽、鋁罐和膠袋等。


註:兩個比賽區內的廢物數量及種類均一樣。

比賽方式:
各參賽隊伍必需在比賽日期前,完成收集器,並於比賽當日帶到會場。
比賽正式開始前,參賽隊伍可進入比賽場地進行調試及改裝;
比賽開始時,所有參賽隊伍,必須將收集器放於大會指定位置,直至該隊開始比賽。期間不得進行改裝。
正式比賽時,裁判會指示將收集器擺放於指定的開始位置,並由參賽隊伍的代表啟動;
每隊參賽隊伍有三分鐘時間進行廢物收集;
比賽完結時,收集區內及收集器上的廢物均會作評分;
當比賽開始後,參賽者不得觸碰收集器;
比賽完結時,裁判會停止收集器的活動,並將收集器垂直移離沙灘進行評分;
裁判需在每次廢物收集開始前,檢查及補充廢物數量及平均分佈,以確保比賽的公平性;
每隊參賽隊伍均有兩次機會進行廢物收集,並會以最好成積一次作為紀錄。
參賽隊伍可以在第一次比賽後和第二次比賽開始前進行改裝。

比賽細則:
收集器可以是自主控制,有線或無線遙控;
每支隊伍應擁有一個(且僅此一個)收集器;
接受檢查時,收集器必須豎直擺放,並且完全伸展;
每輪賽前,各隊應指派一名隊員作「隊長」,在規則許可範圍內,聽從裁判指令負責啟動收集器;
在比賽期間,若非裁判指示,該隊在賽場附近的其他隊員不得離開其座位;
收集器活動時間不得超過三分鐘,每輪比賽的結果由裁判記錄及保存;
一般情況下不允許隊員移動收集器;
當收集器出現翻側或任何明顯不能繼續活動的情況,裁判有權移動收集器;
裁判保留一切最後決定權。

計分方法:
比賽以廢物收集數量、結構及成本評分:

總成積的計算方法是以總決賽所得之分數乘 2/3 加上初賽所得之分數乘 1/3

參賽者操守:
期望所有參賽隊伍的目標皆為公平的比賽;
如果教練過多協助,或者機械人的製作並非主要由學生完成,取消該隊比賽資格;
教練(教師,父母,陪人和其他的成人成員)不允許駐足於學生工作區域;
在學生工作區周圍將提供足夠座位給教練,以起監護作用;
教練干擾收集器或裁判的決定,首犯給予黃牌警告, 再犯則紅牌將其逐出賽場;
所有的行為活動必須服從賽場的管轄;
行為不端的參賽隊員將被驅逐出場,還將可能被取消比賽資格;
如有參加者故意損壞比賽場地,將被取消其比賽資格。
以上規則由裁判、主辦大會執行。

最終回詳情公佈

FINAL ROUND OF THE YOUNG INVENTOR COMPETITION (YIC) COMPETITION
*** Overcoming the Round Condition to Protect the Environment ***

28 February 2009
Repulse Bay, Hong Kong Island

Brief Description:

In this final round of competition, all students are required to design, build and operate their rubbish collector to clean up, as many as they can, all rubbish samples being placed on the beach at different locations. Unlike the first round of competition, the collector is required to operate on a sand foundation. Several critical factors, such as how to ensure (i) the friction between wheels of the collector and sand, (ii) the maneuverability of the collector and (iii) the mechanism that can effectively collect the rubbish samples within a specified time, have to be considered during the design of the collector. In this round of competition, no restriction is in place to those addressed below, on the design of the collector, it can be manually, semi-automatically or fully automatically controlled. If any carrying cable is needed, the participants should make sure that it would not obstruct the moving path of the collector.

Specification:

Dimension: No bigger than 900 mm (L) x 450 mm (W) x 450 mm (H) (the height of the collector should be controlled to avoid toppling over during maneuvering conditions)
Weight: Less than 10 kg
Budget: Below HK$ 1,000 (The organizer will subsidize a maximum of HK$ 1,000 for each group of students to purchase materials for building the collector).
Space: 5 m x 5 m (the size of the playground). The students will not be allowed to enter into the playground during the sample collecting period. In such case, the operator is only allowed to maneuver the collector without physically intervention and/or assistance in rubbish collection.
Duration: Each group of students will have a total of 3 minutes to collect the rubbish samples (e.g. coke cans, soft drink bottles, plastic bags, fruit peels… etc.)
Score: Different rubbish samples bear different scores depending on the size, shape and weight. The Champion will be the team which obtains the highest score in the competition.

Download leftlet
Final Round Details

11月15日記者會流程

我們將於2008年11月15日(星期六) 10:00 – 12:00 假紅磡 香港理工大學 PQ-303舉行青少年發明家比賽2008記者會,流程如下:

Young Inventor Competition 2008 Press Conference
青少年發明家比賽2008 記者會

10:00 – 10:30
Media registration & reception
媒體報到與招待

10:30 MC
Openingby Ms. Wendy Cheung, IMechE HK YMS
英國機械工程師學會香港分部青年部 張嘉怡小姐 主持記者會

10:30 – 10:45
Presentation by Dr C W Tso, Chairman of the Institution of Mechanical Engineers Hong Kong Branch (IMechE HK)
英國機械工程師學會香港分部 主席 曹志華 博士 致辭
“Engineers use technology making life better”
『工程界以科技對改善生活質素』

10:45 – 11:00
Presentation by Ir. Barry Lee, Chairman of the Hong Kong Institution of Engineers Mechanical, Marine, Naval Architecture and Chemical Division (HKIE-MMNC)
香港工程師學會機械、輪機、造船及化學分部 主席 李志康 工程師 致辭
“Creativity and Sustainable Development of Hong Kong”
『培育創意思維確保香港產業永續發展』

11:00 – 11:05
Photo Opportunity
拍攝紀念照

10:05 – 11:30
Presentation by Dr. Alan T K Lau, The American Society of Mechanical Engineers Hong Kong Section (ASME-HK)
美國機械工程師學會香港分會 劉建德 博士
“Introduction of Young Inventor Competition 2008”
『青少年發明家比賽2008 簡介』

11:30 – 12:00
Q & A Session
答問環節

下載 11月15日記者會流程 pdf